Red Blue LED Overhead Crane Warning Safety Light

Safety on a worksite is essential, especially when overhead cranes are present. Most cranes can carry loads of 2000 pounds or larger, which, if accidentally dropped, could result in massive amounts of damage or bodily harm. Cranes carrying heavy loads above can cause many hazards for workers, vehicles, and pedestrians below. So, it is vital that every worksite practices proper crane safety.

When on a worksite, many people are unaware of the positioning of the crane above them. Some worksites utilize audible sirens to warn workers and bystanders of the crane’s movements, but depending on the loudness of the worksite, or the attention of the individual, the audible noise may not be heard. That’s where an overhead crane warning light comes in handy.

Overhead crane lights warn people and vehicles not to walk or drive underneath a suspended load by projecting a light box or “danger zone” on the floor, directly underneath the suspended hook and load. The red, blue LED Safety Warning Light is projected on the floor to grab the attention of any individual on or near the worksite, alerting them of overhead crane use and preventing them from walking underneath the load.

The safety warning light also provides another frame of reference for crane operators and aids them in gaining stable and accurate control of the hook and load that they are moving. By using an overhead crane light and practising crane safety, companies can proactively prevent workplace accidents involving employees, vehicles, and bystanders.

Why You Should Install Crane Warning Safety Lights?

1. Reduce incidences of human error - ensures pedestrians are aware of moving load.

2. Pedestrian sees projected line or spot on floor - knows his proximity to the moving load.

3. Very effective for overhead cranes in areas with many pedestrians.

4. Beeping audible alarms do NOT provide a pedestrian with a sense of proximity to the load on the crane.

5. Crane operators have a new "frame of reference" of the exact position of load/hook above floor.

6. Significantly improves operator control of the load, especially when exact positioning is required.

7. Operators do not have to take their eyes off the crane block or load to know trolley is centered over the load.

8.Snap-on lens cover creates square "box" around load/hook on floor below clear "danger area".

9. Warns pedestrians from walking under suspended load.

Specification:

Application:

Frequently Asked Questions

What are crane lights?

Crane lights refer to lighting fixtures which are attached to cranes. These lights are used for general illumination as well as to provide warning around

areas where the crane is carrying a heavy load. These lights may also be used to assist crane operators with positioning.

Who needs an overhead crane warning light?

The overhead crane warning light is for companies which have fixed overhead cranes. It is the only light of its kind in the industry. Cranes operate in

close proximity to people and in-plant vehicles and can pose a real danger to them if they get too close or if they are unaware of the crane’s presence.

Why You Should Use Safety Lights?

Discover their main benefits:

-Versatility: the lamp is available in two colors (red, blue) and can be used both indoor and outdoor. Thanks to that it’s easy to adjust it to your

company requirements.

-Convenience: the use of lamps makes the work of crane operators much easier and safer and provides them higher control over the load.

-Efficiency: the lamp is an ideal solution especially for crowded areas in any workplace, increasing the safety of your employees around cranes

and loading areas.

How does the warning light work on an overhead crane?

Project lines or points of light from an elevator on the floor to help prevent injuries to workers caused by crane hooks and suspended loads. Each

light has 24 LEDs that emit a light beam on the floor to warn that there is an aerial crane hook in the area.

How are the overhead crane lights installed?

The installation process of all lamps is equally straightforward. All you need to do is mount the lamp directly on the crane. The included adjustable

mounting bracket up and down, making it easy to position the lamp precisely where you want it.

Contact us at info@toptreesafety.com to learn more!!!

North American Master Distributor for US and Canada

www.forklifttrainingsystems.com

info@forklifttrainingsystem.com

614-583-5749